Simple Rules to Follow When Working at Heights

Injury occurring due to falls from a significant height is the largest cause for deaths occurring in working at heights workplaces. Approximately most of the fatal causalities occur due to falling from a height each year. Many construction companies are fined for violating rules after a worker falls from a height and gets seriously injured. In spite of using a fall arrest system there is a risk of fall from working at heights. To avoid accidents a few simple rules have been mentioned here. When taken care of this many injuries and falls can be avoided and employee’s safety can be ensured.

The foremost rule to keep in mind is that, it is always best to avoid working at heights where ever it is not necessary. If the work can be accomplished well using a long stretchable handle attachable to the tool why climb up to work in a height? There is another option available. Even better if the object itself can be lowered to the ground and you can work on it and place it back. It is wise to choose working equipment that suits the present condition and is necessary for this particular task. Using various kinds of equipment can be dangerous. Always keep airbags handy. There should be enough space cleared and kept ready for safety nets and fall harnesses in case of a sudden fall.

Choosing a collective protection if more than one person is engaged and using multiple protective measures will be more suitable if the work is typical. Always having an emergency rescue procedure drafted before working at heights is mandatory. Ladders placed in firm ground and the ends having a firm support is advisable. Also it should be very clear to a worker that ladder should be used only up to 40 minutes in one position with not more than 15 kg.  Trying to overreach when working at heights is notably dangerous. Daily checks for the personal protective gears and updating if any of them is at fault will save many lives. This should be done on a regular and timely basis. While using special equipment and harnesses following manufacturer’s instruction will help in avoiding wrong moves. Dismantle and assembly of equipment should be done in a sequential way and manufacturer’s manual should be followed closely. Daily maintenance should be performed by the supervisor along with the worker.

Working at heights training is provided by Kangaroo training institute as a part of high risk courses. Visit https://kangarootraininginstitute.com.au/  to know more about working at height online refresher course.